Bright bars,drawn to precision.
Cold drawn, peeled and ground bright bars in round (3 to 100 mm), hexagonal (5 to 55 mm) and square (6 to 65 mm) profiles. 25 grades across six quality groups, made in our 80,000 sq. ft. facility near Mumbai.

Steel from India's leading mills
Every bar starts as hot rolled steel from a trusted primary producer, supplied with its mill test certificate.
Our bars reach India's leading OEMs
We supply bright bars to the vendors and component makers who supply these vehicle and tractor manufacturers.
- Mahindra & MahindraFarm Division
- Tata Motors
- Endurance
- Volkswagen
- Maruti Suzuki
- Escorts
- Bajaj
Names are listed to show the supply chains our bars serve through their vendors. They are not direct customers and do not imply endorsement.
Round, hexagonal and square bright bars.
Customised in size, length, grade and quantity to your requirement. Round bars are also supplied peeled and ground for critical parts.
Round bright bars
3–100mmThe most widely used profile. Shafts, pins, spindles, axles, bushes and CNC turned components.
Hexagonal bright bars
5–55mmAccurate across-flat size for high volume machining. Nuts, unions, couplings, hydraulic fittings and adaptors.
Square bright bars
6–65mmSharp, consistent corners and flat faces. Keys, tool parts, jigs, fixtures and block fittings.
25 grades in six quality groups.
From free cutting steel for high speed CNC work to bearing and case hardening grades for races and gears.
Find the right grade for your partFree cutting steel 5 grades
Sulphur or lead bearing grades made for high speed machining. Short chips, long tool life and a fine finish on CNC and automatic lathes.
Carbon steel 7 grades
Medium and high carbon grades for shafts, spindles, studs and machine parts, many of them suited to induction hardening.
Case hardening steel 2 grades
Low carbon chromium manganese grades for carburising. A hard, wear resistant case over a tough core for gears, pinions and shafts.
Alloy steel 4 grades
Chromium, molybdenum and nickel alloy grades that respond well to hardening and tempering. Used for high tensile shafts, gears, axles and bolts.
Bearing steel 2 grades
High carbon chromium steels for bearing races, rollers, balls and wear parts that need high hardness and long fatigue life.
Mild steel 5 grades
Low carbon steels that weld and form easily. Used for general engineering parts, fabricated assemblies, structural members and hydraulic components.
From hot rolled bar to bright bar, in six steps.
Raw material
Hot rolled bars from leading Indian steel mills, each lot with its mill test certificate.
Cold drawing
Continuous drawing machines and draw benches bring bars from 4 to 80 mm to accurate size.
Peeling and grinding
Round bars are peeled and precision ground for a sound, defect free surface.
Straightening and polishing
Straightened and belt polished for true running, bright bars.
Cutting
Band saw cutting to the length you specify.
Testing and MTC
MPI and ultrasonic testing, then dispatch with a Mill Test Certificate.
Bars behind the parts that move industry.
Our bright bars go into components for auto ancillaries, OEMs and machinery makers across these sectors, in Maharashtra, across India and abroad.
Bright bar weight calculator
Work out the weight of round, square and hexagonal bars in kg per metre, per bar and for the full order. Then send the size straight to our team for a quote.
- Uses steel density of 7.85 g/cm³
- Hex size measured across flats
- Ready reckoner tables on the calculator page
Five decades in steel. A modern bright bar mill.
Founded in 1969, we are a trusted name in cold drawn steel bright bars and peeled bars, supplying leading auto ancillary and component manufacturers and machinery makers.
- Quality you can verify. ISO 9001:2015 certified, with in-house MPI and ultrasonic testing and a Mill Test Certificate for every product.
- Proven in OEM supply chains. Our bars go to vendors of Mahindra & Mahindra Farm Division, Tata Motors, Endurance, Volkswagen, Maruti Suzuki, Escorts and Bajaj.
- Trusted raw material. Steel from Tata Steel, JSW Steel, Sunflag Steel, RINL Vizag Steel and Bhushan Power & Steel.
- Made to your requirement. Custom size, length, grade and quantity.
- Safe stock. A multi-level quality check and structured storage programme protect finished goods until dispatch.
- Well connected. Patalganga MIDC sits near the Mumbai-Pune Expressway and JNPT port.

Guides for buyers and engineers.
Cold drawn vs peeled bright bars: which one do you need?
How cold drawing and peeling change a bar's size accuracy, strength and surface, and how to pick the right one for your part.
Read articleEN8 vs EN8D vs EN19: how to choose the right grade
The real differences between three of India's most used shaft grades, with a simple way to decide which one your part needs.
Read articleBright bar weight calculation: formula for round, square and hex bars
The exact formulas, worked examples and ready reckoner tables for calculating steel bar weight in kg per metre.
Read articleCommon questions
Short answers about our products, quality and how to order.
What does Akansha Ispat manufacture?
Akansha Ispat manufactures cold drawn steel bright bars and peeled bars: round bars from 3 to 100 mm, hexagonal bars from 5 to 55 mm and square bars from 6 to 65 mm, in 25 grades of free cutting, carbon, case hardening, alloy, bearing and mild steel.
Is Akansha Ispat ISO certified?
Yes. Akansha Ispat Pvt. Ltd. is certified to ISO 9001:2015 by QRO Certification LLP, certificate number 305025020746Q, valid until 6 February 2028.
Where does Akansha Ispat source its raw material?
Hot rolled bars are sourced from leading Indian steel mills: Tata Steel, JSW Steel, Sunflag Steel, RINL Vizag Steel and Bhushan Power & Steel.
Do you supply a Mill Test Certificate?
Yes. Every product is supported by a Mill Test Certificate. Bars are also checked with MPI (magnetic particle) and ultrasonic testing in-house.
Which OEM supply chains use Akansha Ispat bright bars?
Akansha Ispat supplies bright bars to vendors of Mahindra & Mahindra Farm Division, Tata Motors, Endurance, Volkswagen, Maruti Suzuki, Escorts and Bajaj.
Where is the Akansha Ispat factory?
The factory is at Plot No. F-3, Patalganga MIDC, Chawne Village, Rasayani, Raigad, Maharashtra, close to the Mumbai-Pune Expressway and JNPT port. The head office is in Wadala, Mumbai.
How do I get a quote for bright bars?
Send the grade, profile, size, length, quantity and delivery city through the RFQ form, on WhatsApp at +91 98193 91906, or by email to akansha_ispat@hotmail.com. Attach a drawing if you have one.
Tell us the grade, size and quantity.
Send your requirement and our team will reply with availability and a quotation. Share a drawing if you have one.
+91 98193 91906


