Cross reference

Steel grade equivalents: EN, IS, DIN, SAE and JIS

One steel, five naming systems. This chart maps the grades we supply across all of them, and explains why equivalent never quite means identical.

Quick answer

EN8D corresponds to 080M40 in BS 970, C40 in EN 10083-2, SAE 1040 and JIS S40C. EN19 corresponds to 42CrMo4 (1.7225), SAE 4140 and SCM 440. EN31 is close to 100Cr6 (1.3505), SAE 52100 and SUJ 2. These are nearest equivalents matched on nominal chemistry, not identical specifications.

Cross reference

Grade equivalence chart

Nearest equivalents across the Indian, British, European, American and Japanese systems, grouped by the quality group we supply them in.

GroupCommon nameISBS 970DIN / ENSAE / AISIJIS
Free cuttingEN1A11Mn2230M079SMn28 (1.0715)1213SUM 22
Free cuttingEN1A Leaded11Mn2Pb230M07 Pb9SMnPb28 (1.0718)12L14SUM 24L
Free cuttingEN8M40Mn2S212M3636SMn14 (1.0764)1137SUM 41
Free cuttingSAE 1144–212M4444SMn28 (1.0762)1144SUM 43
CarbonEN8DC40080M40C40 (1.0511)1040S40C
CarbonC45C45080M46C45 (1.0503)1045S45C
CarbonEN9C55Mn75070M55C55 (1.0535)1055S55C
CarbonC60C60080A62C60 (1.0601)1060S58C
CarbonSAE 1018C15080M15C15 (1.0401)1018S15C
Case hardening16MnCr516Mn1Cr1–16MnCr5 (1.7131)5115SCr 415
Case hardening20MnCr520Mn1Cr1–20MnCr5 (1.7147)5120SCr 420
AlloyEN18 / 40Cr440Cr1530M4041Cr4 (1.7035)5140SCr 440
AlloyEN1940Cr1Mo28709M4042CrMo4 (1.7225)4140SCM 440
AlloyEN2440NiCr1Mo28817M4034CrNiMo6 (1.6582)4340SNCM 439
BearingEN31103Cr1534A99100Cr6 (1.3505)52100SUJ 2
StructuralIS 2062 E250IS 2062–S235JR (1.0038)A36 (near)SS400
StructuralST 52.3––S355J2 (1.0577)A572 Gr 50 (near)SM490

Equivalent does not mean identical. These grades match closely on nominal chemistry, but standards differ on residual element limits, permitted ranges, inclusion levels and test methods. Use this chart to find the right conversation to have, not as a substitution approval. Where a part is safety critical, confirm the actual specification against the Mill Test Certificate.

How the systems differ

Five naming systems, one piece of steel

BS 970 (EN numbers)

The British system, and still the lingua franca of Indian engineering drawings. EN8, EN19, EN31. Note that these EN numbers are the old British ones and have nothing to do with modern European EN standards, which is a genuine and common source of confusion.

EN / DIN

The modern European system names steels descriptively: 42CrMo4 means roughly 0.42 per cent carbon with chromium and molybdenum. Each also carries a material number such as 1.7225, which is unambiguous and the safest thing to quote.

SAE / AISI

The American four-digit system. The first two digits give the alloy family, the last two the carbon content in hundredths of a per cent. So 1040 is a plain carbon steel with 0.40 per cent carbon, and 4140 is a chrome-moly steel with the same carbon.

IS

The Indian system, largely descriptive like the European one. 40Cr1Mo28 reads as 0.40 per cent carbon, about 1 per cent chromium, about 0.28 per cent molybdenum. IS 1570 is the parent standard for most engineering steels.

JIS

The Japanese system, which matters in India because so much automotive tooling and so many drawings arrive from Japanese OEMs. S45C, SCM 440 and SUJ 2 appear constantly on component drawings in the Pune and Chennai clusters.

Which to quote

If you have it, quote the European material number. If not, quote the grade name and the standard together, as in EN8D to BS 970 080M40. A bare grade name without its standard is the most common cause of a wrong-material delivery.

A worked example

Turning a Japanese drawing into an Indian order

A component drawing arrives from a Japanese OEM calling for SCM 440, hardened and tempered, 32 mm diameter. Translating that into something a bright bar mill in Maharashtra can quote takes three steps.

  1. Identify the steel. SCM 440 in JIS is 42CrMo4 in the European system, material number 1.7225, SAE 4140, and EN19 on most Indian drawings. All five names describe the same chrome-moly steel.
  2. Check the chemistry actually matches. SCM 440 and 42CrMo4 agree closely on carbon, chromium and molybdenum. Confirm the residual limits your customer cares about before committing.
  3. Write the order in local terms. "EN19 bright round bar, 32 mm, IS 9550 +QT, tolerance h11, with MTC" is a line any Indian bright bar mill can price immediately.
FAQ

Common questions

What is the SAE equivalent of EN8D?

SAE 1040 is the nearest equivalent to EN8D. In BS 970 the same steel is 080M40, in EN 10083-2 it is C40, and in JIS it is S40C. These are close matches on carbon and manganese, not identical specifications.

What is the equivalent of EN19?

EN19 corresponds to 42CrMo4 (material number 1.7225) in the European system, SAE 4140 in the American system, SCM 440 in JIS and 709M40 in BS 970.

Is EN31 the same as SAE 52100?

They are close but not identical. Both are high carbon chromium bearing steels, but EN31 permits 0.90 to 1.20 per cent carbon and 1.00 to 1.60 per cent chromium, while SAE 52100 is tighter at 0.93 to 1.05 and 1.35 to 1.60. For a bearing application the difference can matter.

Are equivalent grades interchangeable?

Not automatically. Equivalence tables match grades on nominal chemistry, but standards differ on residual element limits, permitted ranges, inclusion requirements and test methods. Treat an equivalent as a starting point for a conversation with your supplier, not as a substitution approval.

What does the number after a DIN grade mean, such as 1.7225?

It is the European material number, a unique identifier for that steel in EN 10027-2. It is unambiguous in a way that a name is not, which makes it the safest thing to quote on an international order.

Request a quote

Tell us the grade, size and quantity.

Send your requirement and our team will reply with availability and a quotation. Share a drawing if you have one.