Hexagonal bright bars
Accurate across-flat size for high volume machining. Nuts, unions, couplings, hydraulic fittings and adaptors are turned from hex bar because the flats give the spanner something to hold.
Akansha Ispat manufactures cold drawn hexagonal bright bars from 5 to 55 mm across flats in 25 grades, belt polished and supplied to ISO 286 class h11, with a Mill Test Certificate for every order.
| Size range | 5 to 55 mm across flats |
|---|---|
| Process | Cold drawn, belt polished |
| Typical tolerance class | h11 |
| Grades | All six quality groups, subject to size. See grades |
| Finish | Bright, smooth surface, straightened and polished |
| Typical uses | Nuts, fittings, couplings, adaptors |
| Length and quantity | Customised to your order |
| Documents | Mill Test Certificate with every product |
Bought for the flats, judged on the corners
Across flats is the dimension
A hex bar is specified across flats (A/F), never across corners. The across-corner dimension works out at roughly 1.155 times A/F, which matters when you are checking whether the bar clears a collet or a bar feeder liner.
Corner fill decides scrap
On a poorly drawn hex, the corners do not fill the die and arrive rounded. On an automatic lathe making nuts, under-filled corners mean the spanner flats come out short and the part is scrap. Die condition is the whole game.
Free cutting grades dominate
Most hex bar leaves here in EN1A, EN1A leaded or EN8M. The sulphur breaks the chip, which is what lets a multi-spindle machine run a nut in seconds without a bird nest round the tooling.
Which grade for which fitting
Hex bar buyers are usually making one of four things, and each pushes towards a different grade.
- Standard nuts and general fittings. EN1A or EN1A leaded. Fastest to machine, lowest cost per piece.
- Hydraulic fittings and adaptors that must seal. EN8D or C45, for a denser surface and better thread form.
- High tensile fasteners. EN19 or 42CrMo4, supplied in quenched and tempered condition.
- Case hardened parts. 16MnCr5 or 20MnCr5, carburised after machining.
Hex bar weight, quick reference
| A/F size | kg per metre | Pieces per tonne at 6 m |
|---|---|---|
| 8 mm | 0.435 | 383 |
| 10 mm | 0.680 | 245 |
| 13 mm | 1.149 | 145 |
| 17 mm | 1.965 | 85 |
| 19 mm | 2.454 | 68 |
| 24 mm | 3.916 | 43 |
| 30 mm | 6.118 | 27 |
| 41 mm | 11.428 | 15 |
At 7.85 g/cm³. Formula: kg/m = 0.006798 × A/F². Full tool on the weight calculator.
Hexagonal bright bars: common questions
What size hexagonal bright bars does Akansha Ispat make?
Hexagonal bright bars from 5 to 55 mm across flats, in 25 grades.
Is hex bar measured across flats or across corners?
Across flats. The across-corner dimension is about 1.155 times the across-flat size, which is worth checking against your collet or bar feeder capacity.
What tolerance do hexagonal bright bars hold?
Cold drawn hexagon bars are commonly supplied to ISO 286 class h11 up to 80 mm. IS 9550 specifies h11 for drawn hexagons in this size range.
Which grade is best for machining nuts?
Free cutting grades: EN1A, EN1A leaded or EN8M. Their sulphur content breaks the chip, which keeps multi-spindle automatics running without stoppages.
How do I calculate hexagon bar weight?
Multiply the across-flat size in millimetres squared by 0.006798 for kilograms per metre, for steel at 7.85 g/cm3.
Tell us the grade, size and quantity.
Send your requirement and our team will reply with availability and a quotation. Share a drawing if you have one.
+91 98193 91906