Round bright bars
The most widely used bright bar profile, and the one most machine shops buy by the tonne. Shafts, pins, spindles, axles, bushes and CNC turned components.
Akansha Ispat manufactures round bright bars from 3 to 100 mm diameter in 25 grades, supplied cold drawn, peeled or ground to ISO 286 tolerance classes h9, h10 and h11, with a Mill Test Certificate for every order.
| Size range | 3 to 100 mm diameter |
|---|---|
| Process | Cold drawn, peeled, ground |
| Typical tolerance class | h9, h10, h11 |
| Grades | All six quality groups, subject to size. See grades |
| Finish | Bright, smooth surface, straightened and polished |
| Typical uses | Shafts, pins, spindles, turned parts |
| Length and quantity | Customised to your order |
| Documents | Mill Test Certificate with every product |
Three routes to a round bar
Cold drawn
The hot rolled bar is pointed, then pulled through a tungsten carbide die at room temperature. The section reduces, the surface burnishes bright, and the steel work hardens. This is the standard route for 3 to 50 mm and gives the best combination of size control and cost.
Peeled
The outer skin is turned off on a peeling machine. This removes mill scale, surface seams and the decarburised layer rather than compressing them in. Preferred for larger diameters and for parts that will be induction hardened.
Ground
After drawing or peeling, the bar is centreless ground on our Cincinnati machine. Grinding is what takes a bar to h9 and to the fine surface finish needed for sliding and sealing surfaces.
Not sure which route your part needs? Read cold drawn vs peeled bright bars.
What to tell us when you enquire
A round bar RFQ is quick to quote when it carries five things. Anything missing usually means a phone call before we can price it.
- Grade. EN8D, EN1A, EN19, 20MnCr5 and so on. See the grade list or the equivalence chart if you work to SAE or DIN designations.
- Diameter and tolerance class. h11 is standard for drawn bar, h9 if the part is ground. See tolerance classes.
- Cut length. Standard mill lengths or cut to size.
- Quantity. In kilograms, tonnes or pieces. Our weight calculator converts between them.
- Supply condition. As drawn, annealed, or quenched and tempered.
Round bar weight, quick reference
| Diameter | kg per metre | Pieces per tonne at 6 m |
|---|---|---|
| 10 mm | 0.617 | 270 |
| 16 mm | 1.578 | 106 |
| 20 mm | 2.466 | 68 |
| 25 mm | 3.853 | 43 |
| 32 mm | 6.313 | 26 |
| 40 mm | 9.865 | 17 |
| 50 mm | 15.413 | 11 |
| 63 mm | 24.470 | 7 |
At 7.85 g/cm³. Formula: kg/m = 0.006165 × d². Full tool on the weight calculator.
Round bright bars: common questions
What size round bright bars does Akansha Ispat make?
Round bright bars from 3 to 100 mm diameter, in 25 grades of free cutting, carbon, case hardening, alloy, bearing and mild steel.
What tolerance can a round bright bar hold?
Cold drawn round bars are commonly supplied to ISO 286 class h11, turned and peeled bars to h10, and ground bars to h9. Tell us the class you need and we will confirm what is achievable for your size and grade.
Is a cold drawn bar stronger than the hot rolled bar it came from?
Yes, in tensile and yield strength. Cold drawing work hardens the steel, which raises strength and hardness and lowers ductility. The effect is greatest near the surface.
Can you supply round bars in cut lengths?
Yes. Length and quantity are customised to the order, and bars are cut, deburred and bundled before dispatch.
Do round bright bars come with a test certificate?
Yes. Every order ships with a Mill Test Certificate. Bars are also checked in house with magnetic particle inspection and ultrasonic testing.
How do I calculate the weight of a round bar?
Multiply the diameter in millimetres squared by 0.006165 to get kilograms per metre, for steel at 7.85 g/cm3. A 25 mm bar is 3.85 kg per metre.
Tell us the grade, size and quantity.
Send your requirement and our team will reply with availability and a quotation. Share a drawing if you have one.
+91 98193 91906