Indian Standard

IS 9550: the bright steel bar specification, explained

The product standard that governs what a bright bar has to be in India. Here is what it covers, what it deliberately leaves out, and how to quote it on a purchase order.

Quick answer

IS 9550 is the Indian Standard for bright steel bars. It covers cold drawn, turned, peeled and ground steel bars, specifying supply conditions, dimensional tolerance classes, straightness and testing. The current revision is IS 9550:2024, which supersedes IS 9550:2001. It does not specify chemical composition, which comes from the grade standard.

Scope

What the standard covers

IS 9550 is the product standard for bright steel bars in India. It does not tell you what the steel is made of, that is the grade standard's job. It tells you what the finished bar has to be: how accurately sized, how straight, in what supply condition, and how it is verified.

In scope

  • Cold drawn bars
  • Turned bars
  • Peeled bars
  • Ground bars
  • Round, square, hexagonal and flat sections
  • Dimensional tolerance classes
  • Supply and heat treatment conditions
  • Straightness and surface requirements

Not in scope

  • Chemical composition, which comes from the grade standard such as IS 1570, BS 970, EN 10083 or EN 10084
  • Mechanical property minima for a given grade
  • Hot rolled black bar, which is covered elsewhere
  • Stainless steel bright bars, which have their own specification
Clause 8.2

Tolerance class by finished condition

This is the part of the standard most buyers actually need. Unless something tighter is agreed at the time of order, the finished condition determines the tolerance class.

Finished conditionSectionsTolerance class
DrawnRoundh10
DrawnSquare and hexagon, up to and including 80 mmh11
DrawnSquare and hexagon, above 80 mmh12
Drawn, final quenched and temperedRoundh11
Turned, turned and reeledRoundh10
GroundRoundh9

Tolerance classes are those of IS 919 (Part 2), which is technically equivalent to ISO 286-2. The deviations are negatively disposed about the nominal size: a 20 mm bar to h9 is 20.000 / 19.948 mm. See the full tolerance tables.

Clause 5

Supply condition symbols

IS 9550 designates how the bar was processed and heat treated using short symbols. These appear on test certificates and on well-written purchase orders, and they change both the price and what the bar will do in your machine.

+CCold drawn
+A+SHSoft annealed, then peeled or turned
+A+CSoft annealed, then cold drawn
+FP+SHTreated to ferrite-pearlite structure and hardness range, then peeled or turned
+FP+CTreated to ferrite-pearlite structure and hardness range, then cold drawn
+QTQuenched and tempered

Writing a purchase order that cannot be misread

A bright bar order that quotes IS 9550 alone is incomplete, because the standard deliberately leaves the steel itself to another document. A complete line reads roughly like this:

EN8D bright round bar, 25 mm dia, IS 9550 +C, tolerance h11, cut 3 m, 2000 kg, with MTC

That names the grade, the section and size, the product standard, the supply condition, the tolerance class, the length, the quantity and the documentation. Nothing is left to assumption.

Send us a requirement in this form
History

Which revision applies

IS 9550 has been revised twice. If your drawing or purchase specification still calls up an older revision, it is worth checking which one your supplier is certifying to.

RevisionStatusNotes
IS 9550 : 2024CurrentSecond revision. Scope modified, definitions of bright bar and of peeled product, thickness and out of round added, earlier amendments incorporated.
IS 9550 : 2001SupersededFirst revision. Carried two amendments. Still widely quoted on older drawings.
IS 9550 : 1980WithdrawnOriginal. Superseded by the 2001 revision.

This page is a plain-language summary written for buyers, not a substitute for the standard. Purchase a controlled copy from the Bureau of Indian Standards for the authoritative text.

FAQ

Common questions

What is IS 9550?

IS 9550 is the Indian Standard that specifies bright steel bars. It covers cold drawn, turned, peeled and ground steel bars, setting out supply conditions, dimensional tolerance classes, straightness and testing requirements. The current revision is IS 9550:2024, the second revision, which supersedes IS 9550:2001.

What tolerance does IS 9550 require for a drawn round bar?

Drawn round bars and turned bars are normally supplied to tolerance class h10, drawn hexagons and squares to h11 up to and including 80 mm and h12 above 80 mm, and ground products to h9. Tighter classes can be agreed between purchaser and supplier at the time of order.

What does the designation +C or +A+C mean?

They are supply condition symbols. +C is cold drawn, +A+C is soft annealed then cold drawn, +A+SH is soft annealed then peeled or turned, +FP+C is treated to a ferrite-pearlite structure and hardness range then cold drawn, and quenched and tempered conditions are designated separately.

Does IS 9550 cover chemical composition?

No. IS 9550 governs the bright bar product: its dimensions, tolerances, surface and supply condition. The chemical composition and mechanical properties come from the grade standard, such as IS 1570, BS 970 or EN 10083 for the steel in question.

Is a bright bar the same as a black bar?

No. IS 9550 defines bright bars as drawn, peeled or turned bars with smoother surface quality and better dimensional accuracy than hot rolled bars. A black bar is the hot rolled bar before any of that processing.

Request a quote

Tell us the grade, size and quantity.

Send your requirement and our team will reply with availability and a quotation. Share a drawing if you have one.