25 steel grades for bright bars
Free cutting, carbon, case hardening, alloy, bearing and mild steel. Pick an application below to see which grades are usually used for it.
Akansha Ispat supplies bright bars in 25 grades across six quality groups: free cutting steel, carbon steel, case hardening steel, alloy steel, bearing steel and mild steel. Popular grades include EN8D, C45, EN19 (42CrMo4), EN24, EN31, 20MnCr5, 16MnCr5, EN1A and SAE 1144.
What are you making?
Choose an application to highlight the grades usually used for it.
Showing all 25 grades.
Free cutting steel 5
Sulphur or lead bearing grades made for high speed machining. Short chips, long tool life and a fine finish on CNC and automatic lathes.
Carbon steel 7
Medium and high carbon grades for shafts, spindles, studs and machine parts, many of them suited to induction hardening.
Case hardening steel 2
Low carbon chromium manganese grades for carburising. A hard, wear resistant case over a tough core for gears, pinions and shafts.
Alloy steel 4
Chromium, molybdenum and nickel alloy grades that respond well to hardening and tempering. Used for high tensile shafts, gears, axles and bolts.
Bearing steel 2
High carbon chromium steels for bearing races, rollers, balls and wear parts that need high hardness and long fatigue life.
Mild steel 5
Low carbon steels that weld and form easily. Used for general engineering parts, fabricated assemblies, structural members and hydraulic components.
Grade equivalents and typical uses
Approximate equivalents across BS/EN, DIN, AISI/SAE and IS standards, for quick reference.
| Grade | Type | Approximate equivalents | Typical uses |
|---|---|---|---|
| EN8D | Carbon steel | 080A42 · approx. C45 / AISI 1045 | Shafts, axles, studs, induction hardened parts |
| C45 | Carbon steel | 1.0503 · approx. AISI 1045 / EN8D | Shafts, spindles, machine parts |
| C35 | Carbon steel | 1.0501 · approx. AISI 1035 | Bolts, studs, general shafts |
| EN9 | Carbon steel | 070M55 · approx. C55 / AISI 1055 | Gears, sprockets, wear parts |
| C60 | Carbon steel | 1.0601 · approx. AISI 1060 | Wear resistant parts, springs |
| SAE 1030 | Carbon steel | approx. C30 | Fasteners, machine parts |
| SAE 1541 | Carbon manganese steel | High manganese medium carbon | Hardened bolts, axle shafts |
| EN19 | Alloy steel | 709M40 · approx. 42CrMo4 / AISI 4140 | High tensile shafts, gears, bolts |
| 42CrMo4 | Alloy steel | 1.7225 · approx. EN19 / AISI 4140 | Shafts, gears, hydraulic parts |
| 40Cr4 | Alloy steel | approx. 41Cr4 / AISI 5140 | Shafts, gears, axles |
| EN24 | Alloy steel | 817M40 · approx. AISI 4340 | Heavy duty shafts, gears, spindles |
| EN31 | Bearing steel | 535A99 · approx. 100Cr6 / SAE 52100 | Bearing races, rollers, wear parts |
| SAE 52100 | Bearing steel | approx. 100Cr6 / EN31 | Bearing races, balls, rollers |
| 16MnCr5 | Case hardening steel | 1.7131 · approx. AISI 5115 | Gears, pinions, piston pins |
| 20MnCr5 | Case hardening steel | 1.7147 · approx. AISI 5120 | Gears, crown wheels, shafts |
| EN1A | Free cutting steel | 230M07 · approx. AISI 1215 / 9SMn28 | CNC turned parts, fittings |
| EN1A Leaded | Free cutting steel | 230M07Pb · approx. 12L14 / 9SMnPb28 | High speed turned parts |
| EN8M | Free cutting steel | Free machining version of EN8 | Turned shafts and spindles |
| SAE 1144 | Free cutting steel | approx. 44SMn28 | Shafts, hydraulic parts, pins |
| EN15AM | Free cutting steel | 214M15 | Turned parts, fittings, fasteners |
| SAE 1018 | Mild steel | approx. C15 / 080A15 | Pins, turned parts, case hardened parts |
| SAE 1020 | Mild steel | approx. C22 / 070M20 (EN3) | General engineering, fasteners |
| IS 2062 | Mild steel | E250 · approx. S275 | Fabrication, structural parts |
| ST 52.3 | Mild steel | DIN 17100 · approx. S355J2 | Hydraulic cylinders, structural parts |
| S355 J2 | Mild steel | EN 10025 · approx. ST 52.3 / IS 2062 E350 | Structural, hydraulic, fabricated parts |
Equivalents are approximate. Chemistry and mechanical properties differ between standards. Always confirm against your drawing or specification. For a fuller cross reference see the grade equivalence chart and the chemical composition chart.
Grade questions
Not sure which grade fits? Send your drawing and our team will suggest one.
EN8 vs EN8D vs EN19 explainedHow many steel grades does Akansha Ispat supply?
25 grades in six quality groups: free cutting steel (EN1A, EN1A Leaded, EN8M, SAE 1144, EN15AM), carbon steel (EN8D, C45, C35, SAE 1030, EN9, C60, SAE 1541), case hardening steel (16MnCr5, 20MnCr5), alloy steel (EN19, 42CrMo4, 40Cr4, EN24), bearing steel (EN31, SAE 52100) and mild steel (SAE 1018, SAE 1020, IS 2062, ST 52.3, S355 J2).
Which grade is best for CNC turned parts?
Free cutting steels such as EN1A, EN1A Leaded and SAE 1144 machine fastest with short chips and a good finish. If the part must also carry load or be hardened, EN8M or SAE 1144 are common choices.
Which grade is best for gears?
Case hardening steels 16MnCr5 and 20MnCr5 are widely used for carburised gears and pinions. Through hardened gears often use EN19 (42CrMo4) or EN24.
What is the equivalent of EN19?
EN19 (709M40) is broadly equivalent to 42CrMo4 (1.7225) and AISI 4140. Always check the exact chemistry and properties required by your drawing.
Which grade is used for bearings?
EN31, equivalent to SAE 52100 and 100Cr6, is the standard high carbon chromium bearing steel used for races, rollers and balls.
Not sure which grade to use?
Share your drawing or application. Our team will suggest a suitable grade and confirm availability in your size.
+91 98193 91906