Round, hexagonal and square bright bars
Cold drawn steel bright bars and peeled bars, customised in size, length, grade and quantity, with a Mill Test Certificate for every product.
Akansha Ispat manufactures cold drawn bright bars in round (3 to 100 mm), hexagonal (5 to 55 mm across flats) and square (6 to 65 mm) profiles, plus peeled and ground round bars, in 25 grades of free cutting, carbon, case hardening, alloy, bearing and mild steel.
Compare profiles
| Profile | Size range | Process | Typical tolerance | Typical uses |
|---|---|---|---|---|
| Round bright bars | Ø 3–100 mm | Cold drawn, peeled or ground | h9, h10, h11 | The highest tonnage profile. |
| Hexagonal bright bars | A/F 5–55 mm | Cold drawn, belt polished | h11 | Accurate across-flat size for high volume machining. |
| Square bright bars | 6–65 mm | Cold drawn | h11 | Sharp, consistent corners and flat faces. |
| Peeled and ground round bars | On request | Peeled, ground, straightened, polished | h9, h10 | Outer layer removed rather than compressed in. |
Tolerance classes follow ISO 286, adopted in India as IS 919 Part 2. See the full tolerance tables, or confirm the achievable class for your size and grade with our team.
Four profiles, 25 grades
Round bright bars
Ø 3–100 mm
The highest tonnage profile. Shafts, pins, spindles, axles, bushes and CNC turned components.
See round bright barsHexagonal bright bars
A/F 5–55 mm
Accurate across-flat size for high volume machining. Nuts, unions, couplings, hydraulic fittings and adaptors.
See hexagonal bright barsSquare bright bars
6–65 mm
Sharp, consistent corners and flat faces. Keys, tool parts, jigs, fixtures and block fittings.
See square bright barsPeeled and ground round bars
On request
Outer layer removed rather than compressed in. Large and critical shafts and induction hardened parts.
See peeled and ground round barsSpecification tables for engineers
Four reference pages covering the data most often needed when writing a bright bar enquiry or checking an incoming certificate.
IS 9550 explained
The Indian Standard for bright steel bars: scope, supply condition symbols and tolerance class by finished condition.
Tolerance classes
Full ISO 286-2 shaft tolerance tables, h6 to h12, from 1 to 250 mm, and what each class costs to hold.
Chemical composition
Carbon, manganese, chromium and the rest, for 24 grades, with the governing standard for each.
Grade equivalents
EN, IS, DIN, SAE and JIS designations mapped across, with a note on why equivalent is not identical.
Flat bars, special profiles and sections
Our ISO 9001:2015 certified scope also covers flat bars, ground bars, special profiles and sections in cold drawn condition. Share your drawing and our team will check what we can make for you.
Product questions
What sizes of bright bars does Akansha Ispat make?
Round bright bars from 3 to 100 mm diameter, hexagonal bright bars from 5 to 55 mm across flats, and square bright bars from 6 to 65 mm.
Can bars be customised?
Yes. Akansha Ispat customises size, length, grade and quantity to match each customer's requirement.
Do you supply a Mill Test Certificate?
Yes. Every product is supported by a Mill Test Certificate for complete quality assurance.
What tolerance can bright bars be supplied to?
Bright bars are commonly supplied to ISO 286 tolerance classes such as h9, h10 and h11 for round bars, and h11 for square and hexagonal bars. See the full tolerance tables, and share the class you need in your RFQ.
What is the difference between cold drawn and peeled bars?
Cold drawn bars are pulled through a die, which gives tight size control and higher surface strength. Peeled bars have their outer layer turned off, which removes surface defects and decarburisation.
Do you make ground bars, flat bars or special profiles?
Akansha Ispat's ISO 9001:2015 scope covers ground bars, flat bars, special profiles and sections in cold drawn condition. Share your drawing to check feasibility.
Tell us the grade, size and quantity.
Send your requirement and our team will reply with availability and a quotation. Share a drawing if you have one.
+91 98193 91906